Cpu fan manual

Then check the CPU cooler to ensure it is properly secured to the motherboard. Connect the fan power lead on the CPU cooler to the CPU fan header on the motherboard. Refer to your motherboard user manual for the CPU fan header location. If the CPU cooler has RGB LED, connect the bundled RGB cable to CPU cooler and the RGB header on the motherboard. Adjusting the Fan Speed Fan speed control panel provides Smart Fan and Manual Fan settings. You can switch the control mode by clicking the Smart Fan or Manual Fan tabs on the Fan control panel. How to enter the fan speed control panel 1. Go to Features User Scenario, click Customize. 2. In the Fan section, click CPU/ PUMP/ SYS fan setting.  · Your CPU fan will likely have an option for a target temperature, in degrees Celsius, and a minimum speed, either in percentage or RPM. Basically, this allows you to say “Keep my fan at X speed until the CPU reaches Y degrees—then intelligently ramp up the fan to cool it down.” The hotter your CPU gets, the faster your fan will spin.

Technically, the 4-wire PC/CPU cooling fan is usually known as "4-Wire Pulse Width Modulation Controlled Fan". The first wire of the white 4-pin fan connector is the ground/common (0V) lead, and the next is the power (+12V) wire. Third one provides the fan speed information (TACHO), and the fourth wire is for the fan speed control (PWM). The settings for the control of case and CPU fans are made via the 'Mainboard' page on the bottom Fan Control. Settings for fan control of the mainboard fans. Available methods for fan control Manual control at constant speed. Dialog for configuration of fan control. Wide-range PWM fan with unique wave-shaped blade design for excellent airflow. Versatile all-in-one mounting solution supporting the latest Intel® LGA / / / and AMD FM2 / FM1 / AM3+. overview; Manual; CPU-Z - Cooler Master 32 bit versions; EAN / UPC.

Adjusting the Fan Speed Fan speed control panel provides Smart Fan and Manual Fan settings. You can switch the control mode by clicking the Smart Fan or Manual Fan tabs on the Fan control panel. How to enter the fan speed control panel 1. Go to Features User Scenario, click Customize. 2. In the Fan section, click CPU/ PUMP/ SYS fan setting. IMPORTANT FOLLOW UP - www.doorway.ru FROM GHOSTMAXIS ON WHAT MODELS ARE SUPPORTED - www.doorway.ru In Manual control mode, the fan spins at a fixed speed. The Manual Duty Cycle parameter is used to control this. Duty cycle increment (%/°C) Fan speed increases by this percentage for each degree over the minimum temperature. Manual Duty Cycle (%) This parameter is only visible when the Control Mode is set to Manual.